Whitewall Tires American Classic

Buy Whitewall tires American Classic – Whitewall tires American Classic for sale – Order Whitewall tires American Classic

Our Whitewall tires American Classic are straight from the factory, and we give you the best and original tires of all the tires you receive.

 Whitewall width: 1 5/8″
 Recommended Rim Widths: 5.5-6″
 Construction: Poly/Steel
 Load/Speed Index: 82H
 Maximum Load Capacity: 1047 pounds at 35 Pounds Per Square Inch Air Pressure
 Tread Width: 6.04 inches
 Section Width: 7.64inches
 Overall Diameter: 23.06″
 Handcrafted in the USA.
Asymmetrical tread design provides optimum traction and handling performance.
Smooth whitewall.
All-season tread design.
Outstanding ride and long tread-life.
Polyester cord with steel belts
Tubeless construction
DOT and ECE certified
UTQG: Treadwear 540, Traction: B, Temperature: B
Approximate estimated mileage: 45,000
Recommended air pressure: 35 PSI
Whitewalls are molded into the tire during construction, not added on later.

 *Please order your tires carefully. Could we help you? If you need to return tires and it is not our fault, there is a 20% re-stocking fee.
 Tires must be returned in the same condition as shipped and not mounted. We cannot accept tires that have been mounted.
 Shipping costs are the responsibility of the customer.
 If you run inner tubes with your tires, it is imperative that you carefully inspect and remove all stickers on the inside of the tires. We have found as many as six inspection stickers. They are not always easy to remove. We have used a hair dryer to loosen them up. If you do not remove these stickers, they can puncture your inner tubes and cause a flat tire, which could be a safety hazard. Please call us if you have any questions on this important issue.

American Classic Tire Details

• Construction: Polyester cord with steel belts
•  All American Classic radials are tubeless; however, they are “tube-friendly”. It is perfectly OK to run inner-tubes but make sure you remove all inspection tags first before installing inner tubes.
•  All sizes are both DOT and ECE-marked. ECE is the certification for the European market.
• UTQG: Treadwear: 540. Traction B represents the tire’s ability to stop on wet pavement. Temperature: B represents the tire’s resistance to the generation of heat and its ability to dissipate heat.
• Approximate mileage: 45,000. Note: this is an estimate, not a warranty.
• Recommended PSI: 35 PSI. Low air pressure can cause the sidewall to crack or lead to tire failure.
• Mounting/Balancing Recommendations: Static balance with the weights on the inside of the tire only in order to protect the soft whitewall. This also gives a more pleasing appearance. Recommend the use of lug-centric balancing over hub-centric. Due to the cosmetic whitewall insert these tires may take 3 to 5 ounces to balance; this is normal.
• Made in the USA. The whitewalls, redlines, and goldlines are molded into the tire, not added on after the tires are made.
• Caution: When converting a bias to a radial, the 75 series will be closer to the 80 series bias size. The 70 series may rub in some applications, especially with fender skirts.
• All listed measurements are non-scientific and may change with different rim widths.
• Never mix bias and radials on the same vehicle because the vehicle may steer uncontrollably.
• Old rims can often be out-of-round and should be carefully checked before mounting.
• Older rims designed for bias-ply tires may crack if used with modern radials, as the radial places more stress on the wheels.

Best Place to Buy Whitewall Tires American Classic – How to Order Whitewall Tires American Classic